What's the structure of the tap?

2019-06-03 539

Operating Principle of Ceramic Valve Core:

Generally, the bottom of the ceramic spool consists of three holes, one for cold water, the other for hot water, and the other for internal water.

Both the cold and hot holes of the tap valve core have sealing rings to ensure that the main inclined street is sealed. After the main body of the cold and hot water intake pipe is connected, the hot water pipe and the cold water pipe pipe pipe correspond to the two holes of the valve core one by one. The spool mainly controls the opening and closing of the two holes, and relies on the movement of ceramic sheets to operate. Where the water quality is not very good, impurities can be filtered through the installation of a filter screen, which also avoids the possible harm of impurities to the ceramic spool. The installation orientation of the filter screen has two parts: the inlet and the outlet.

Because there are many kinds and classifications of faucets, the planning of different classifications of faucets is very different, so the faucet structure map is completely different. So we should first recognize what kinds of faucets are. Generally, the faucets we use in our daily life are: single-connected faucets, double-connected faucets, triple-connected faucets. According to the different handles, they can also be divided into single-handled faucets and double-handled faucets. These different faucets are very different in the faucet structure chart, so we should first classify them and then understand the relevant faucet structure chart. Next we will take the bathtub faucet as an example for a brief explanation.